How To Use - Black+Decker POWER PRO AS600 Manual De Instrucciones

How to Use

This appliance is for household use only.
GETTING STARTED
Remove any labels, stickers or tags attached to the body or soleplate of the
iron.
Note: Use ordinary tap water for ironing. Do not use water processed through
a home softening system.
Important: For optimum performance, let the iron stand for 90 seconds before
beginning to iron.
A
B
C
IRONING WITH STEAM
Surge of Steam
Use to remove stubborn creases.
D
E
14
FILLING WATER TANK
1. Place your thumb at the bottom center of the water-fill
cover and push up to open (A).
2. Tilt the iron and using a clean measuring cup, pour
water into opening until the water reaches the MAX level
mark on the water tank (B). Do not overfill.
3. After filling, close the water-fill cover.
4. Plug in the iron. The temperature-ready indicator light
comes on (C).
1. With the water tank filled to the MAX mark, turn the
fabric-select dial to appropriate setting (between 4 and
6) for your fabric (D). See fabric guide on the heel rest
and read garment's label to help you determine fabric
type.
2. Move the dry/steam selector to the desired steam
(E).
level
10