Setting Up The Device; Mains Connection; Operating The Device; Switching On/Standby - Medion LIFE P66970 Manual De Instrucciones

7. Setting up the device

Place the device on a sturdy, level surface. Some aggressive varnishes can corrode
the rubber feet on the device. If necessary, place the device on a suitable underlay.

7.1. Mains connection

Connect the mains adapter.
 To do this, place the connection cable plug in the socket
DC IN 9V
 Plug the mains adapter into a properly installed 230 V ~ 50 Hz earthed power
socket, which is easily accessible at all times.

8. Operating the device

8.1. Switching on/standby

 Press and hold the FUNC. button until the display switches on.
 Press and hold the FUNC. again to switch the device back to standby mode. The
display switches off.

8.2. Selecting the operating mode

 Press the M button once or several times to run through the operating modes:
− – WLAN mode
− BT – Bluetooth mode
− AUX – Mode for external device
− TF – Memory card mode (only when a memory card is inserted)

8.3. Volume

 Press the + button to increase the volume.
 Press the  button to lower the volume.
If a device is connected via Bluetooth or if a device is connected to the
AUX IN jack you can also adjust the volume on the devices directly.
54
2.5A on the rear of the device.