CBC ZC-F10C2 Instrucciones De Uso página 2

Cautions:
1. Power supply
(1) Use only with a 24V AC power supply marked class 2.
(2) Be sure to connect each lead to the appropriate terminal. Wrong
connection may cause malfunction and/or damage to the video camera.
2. Operating and storage locations
(1) Do not attempt to aim the camera at the sun or other extremely bright
objects that cause smear to appear irrespective of whether the camera
is operating or not. This can damage the CCD (Charge Coupled Device).
(2) Do not place the camera in the following locations.
1 Locations subjected to extremely high or low temperatures
(storage temperature range: -20°C to +60°C [-4°F to +140°F] )
2 Locations subjected to high levels of humidity and dust
(storage humidity range: max. 95% (no condensation) )
3 Locations where there are large amounts of water vapor and steam
4 Locations subjected to excessive vibrations
(3) When this camera is installed near the equipment like wireless commu-
nication device which emits strong electromagnetic field, some irregular-
ity such as noise on monitor screen may appear.
3. Handling of the unit
Do not allow the camera to be subjected to strong impacts or shocks. The
camera could be damaged by improper handling or storage.
• Never attempt to disassemble or modify the camera.
• If an abnormality should happen to occur, immediately turn off the power
and consult your dealer.
WARNING
This symbol indicates that there is a possibility of serious injury or even death if
the product is not used correctly.
CAUTION
This symbol indicates that there is a possibility of slight or greater injury or
damage to equipment.
ZC-F10C2*7.p65 2 9/13/00, 9:04 PM