Twin Star M5 Manual Del Producto

01 ENGLISH
Product Manual / Warranty
1. Package Contents
TWINSTAR IC / TWINSTAR Reactor / Adapter / Suction Plates (3)
2. Names of parts
Power output
terminal
Mode selection indicator
Left : mode 1
Right : mode 2
Power button/
Mode selection button
Power input terminal
TWINSTAR IC
3. Turning on the Power
Pushing the Power Button will turn on the power and start the operation.
Capacity
Model
Mode 1
M5 20L ~ 50L
S5 20L ~ 50L
Shrimp 50 40L ~ 50L
4. Installation
For optimal performance, please install the Reactor below 10~15cm of the Outflow.
Installing the Reactor in areas lacking water flow will cause reduction in performance.
1) Fix the Suction cups to the back of the Reactor.
2) Attach the Reactor below 10~15cm from the outflow in the tank.
3) Fix the Suction cups to the back of the TWINSTAR IC.
4) Once the Suction cups are fixed, attach the TWINSTAR IC to an appropriate area
on the aquarium's outer wall.
5) Connect the Reactor Cable to the Power Output Terminal of the TWINSTAR IC.
6) Connect the Extension Cable to the Power Input Terminal of the TWINSTAR IC
and connect the Extension Cable to the Adapter.
7) Push the Power Button and check that it is operating normally.
5. Precautions regarding the Water Quality in Aquarium
1) Please completely remove any dust from the water for 3~5days before use.
2) Please completely remove the algae that has already occurred in the tank before
Installing TWINSTAR. It can not remove pre-existing algae.
3) You must take the Reactor off from the water due to soil dust when you maintain tank
or cut plant. Any dust in the water will shorten the life of the Reactor.
4) Please keep the power input/output terminal away from the water. Otherwise,
this will Cause a failure in the operation of the terminal due to corrosion.
In case the terminal is exposed to water, drain as soon as possible and let it dry.
5) Do not use this Product if you have put in salt in the water for medicated bath.
6) TWINSTAR can not be together used with fish medicine.
6. Cleaning the Reactor
1) The Reactors are consumables, requiring them to be replaced during use.
2) If you want to clean the Reactor, first, add 20cc of sodium hypochlorite to 1,000cc of
water. Then, put the Reactor into the diluted solution for over 3 hours. Lastly, take out
the Reactor and wipe it with a soft sponge. You should only clean the plastic part and
never clean the metal nets as the metal nets have special coating on them.
Reactor
7. Safety Precautions
This Product is only to be used in a freshwater aquarium, and not to be used in a salt water
aquarium. Do not use this Product for any purpose other than those specified above.
1) Please read the Product Manual and use the Product according to the instructions in this
Product Manual.
2) Please ensure that there is no safety problem with the living thing (including aquarium fish)
before installing the Product.
3) Do not clean the metal nets of the Reactor.
4) Please turn on the power after the Product has been completely installed.
Mode 2
5) Do not put your hands into the aquarium once you have turned on the power.
6) Do not drop the Product or apply strong force to it.
50L ~ 120L
7) Please unplug the Power Cord when installing, removing, or retrieving the Product.
8) Please unplug the Power Cord if the Product is not to be used for a long time.
50L ~ 100L
9) Do not modify or disassemble the Product. Also, do not use the Product in any manner
other than those specified above.
50L ~ 100L
10) Please keep the Product out of reach of children.
8. Warranty Repair and Warranty Period
For warranty service, please contact your place of purchase.
1) The warranty period is 1 year from the date of purchase (excluding the Reactor).
2) This warranty does not apply where damage is caused by the Customer's mishandling.
3) The Customer must provide this Warranty Certificate to receive any services under this
warranty.
4) Please do not lose this Warranty Certificate as it will not be reissued.
5) For repairs beyond the warranty period, please ask dealership.
6) The warranty period for the Reactor is 6 months from the date of purchase and it is possible
to repurchase the Reactor.
7) The Customer must also provide the label attached to the Product in order to receive any
services under this warranty. If the label is damaged, altered or removed, the Customer
cannot receive any services under this warranty.
This warranty does not apply if the Product is:
1) improperly repaired, modified or disassembled;
2) used for any purpose other than a freshwater aquarium;
3) used for any purpose other than an ordinary household aquarium
4) damaged by Acts of God or other external causes, including but not limited to, fire,
earthquake, fluctuation or surges of electrical power and lightning.
Date of Purchase
Place of Purchase
Customer's Name
Address / Contact Number