Description Of Symbols; General Safety - Silverline 127859 Manual Del Usuario

GB

Description of Symbols

The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear head protection.
Wear hand protection.
Read instruction Manual.
This product emits poisonous fumes
Conforms to relevant legislation and safety standards.
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check with
your local authority or retailer for recycling advice.
Specification
Engine size: .......................................... 22.5cc
Engine power: ...................................... 0.65kW
Fuel: ..................................................... Unleaded petrol/
Fuel tank capacity: ............................... 0.6L
Spark plug type: ................................... Torch L7RTC
(alternative: NGK BPM7A or Bosch WS8F)
Rated speed: ........................................ 7500m/min
No load speed: ..................................... 0-9000min
Cutting length: ...................................... 600mm
Max branch thickness: ......................... 24mm
Weight: ................................................. 7.2kg
Weighted vibrations: ............................. 8.079m/s
Sound pressure: ................................... 98.28dB(A)
Sound power: ....................................... 101.17dB(A)
The sound intensity level for the operator may exceed 85dB(A) and
sound protection measures are necessary.
As part of our ongoing product development, specifications of
Silverline products may alter without notice.

General Safety

Carefully read and understand this manual and any label attached to
the tool before use. Keep these instructions with the product for future
reference. Ensure all persons who use this product are fully acquainted
with this manual.
Even when used as prescribed it is not possible to eliminate all residual risk
factors. Use with caution. If you are at all unsure of the correct and safe
manner in which to use this tool, do not attempt to use it.
4
127859_Manual.indd 4
Keep guards in position
•
Remove adjusting keys
•
Clean the work area
•
Children and pets
•
Use the correct tool
•
•
Wear suitable clothing and footwear
•
Keep your balance
•
Accessories
•
2 stroke mix(40:1)
Never stand on your tool
• Standing on your tool or its stand could cause serious injury if the tool is
Secure work
•
-1
Check for damaged or missing parts
•
2
Internal Combustion Safety
Dangerous environment
•
Protect yourself from vibration
•
Protect your hearing
•
Switch off before connecting
•
Always keep guards in position, in good working order, correctly adjusted
and aligned. Never attempt to use a tool if any of the supplied guards are
missing. If any guards are damaged, replace before use.
Always check to see that keys and adjusting devices are removed from
the tool before use.
Accidents can occur where benches and work areas are cluttered or
dirty, floors must be kept clear, avoid working where the floor is slippery.
If working outdoors, make yourself aware of all potential slip and trip
hazards before using this tool.
Children and pets should always be kept at a safe distance from your
work area. Lock tools away where children can't get access to them. Do
not allow children, or untrained persons to use this tool.
Don't force, or attempt to use a tool for a purpose it was not designed.
This tool is not intended for industrial use.
Don't wear loose fitting clothing, neckties, jewellery, or other items which
may become caught. Wear non slip footwear, or footwear with protective
toe caps where appropriate. Long hair should be covered or tied back.
Don't over reach, keep proper footing at all times, do not use tools when
standing on an unstable surface.
The use of any attachment or accessory other than those mentioned
in this manual could result in damage or injury. The use of improper
accessories could be dangerous, and may invalidate your warranty.
tipped, or collapses. Do not store materials above or near the tool so that
it is necessary to stand on the tool or its stand to reach them.
Where possible, always secure work. If appropriate use a clamp or vice, it
will allow you to use both hands to operate your tool.
Before each use, check if any part of the tool is damaged or missing,
check carefully that it will operate properly and perform its intended
function. Check alignment of moving parts for binding. Any guard or other
part that is damaged should be immediately repaired or replaced by an
authorised service centre. DO NOT USE IF DEFECTIVE.
Do not use petrol tools in damp or wet conditions, or expose them to
rain. Provide adequate surrounding work space and keep area well lit.
Do not use petrol tools where there is a risk of explosion or fire from
combustible material, flammable liquids, flammable gases, or dust of an
explosive nature.
Hand held tools may produce vibration. Vibration can cause disease.
Gloves to keep the operator warm may help to maintain good blood
circulation in the fingers. Hand held tools should not be used for long
periods without a break.
Always wear suitable hearing protection when tool noise exceeds 80dB.
It is the responsibility of the user to ensure that other people near to
where the tool is to be used are also suitably protected.
Ensure that the engine is stopped before connecting any accessories to
the tool. If the tool stops unexpectedly make sure that the engine is not
running before attempting to check the tool.
1/4/10 17:34:16