Inateck PR02001 Guia Del Usuario página 8

4. Installation of Driver
EN
In the USB flash drive users can find the drive and its installation
instruction (for both Mac and Windows). They are also available on the
official site www.inateck.com.
5. Functions of Form Feed Button
5.1 Skip a blank label
When under standby mode and the paper is installed properly, press the
form feed button and the printer will skip a blank label automatically.
5.2 Auto-recognition of paper type (label/bill)
5.2.1 Power off the printer;
5.2.2 Open the top of the printer and put paper into it. Close the top and
power on the printer.
5.2.3 After the initialization of the printer, which takes around 3-5 seconds,
press the form feed button and hold until a "beep" sound is heard. The
printer will then recognize the paper type automatically.
5.2.4 In the printer preferences, set the paper type to continuous paper
5.3 To print self-test page
When under standby mode with paper properly installed, press the form
feed button and hold. A "beep" sound will be heard. Go on holding until
another two sounds of "beep" are heard. After releasing the form feed
button, the printer will print a self-test page.
5