Use And Operation - Klarstein 10007544 Manual Del Usario

Assembling and Disassembling
1. Insert the hose connector
into air inlet mouth as pic-
ture shows make sure the
connector is tightly fas-
ten. Press the connector
button as picture shows
and pull the connector out
when want to pull hose
connector from machine.
Using the Accessory
Wet floor nozzle for
floor, carpet, etc.
Getting Started
Insert plug into the supply socket. Press switch button, the machine begin to work.
You can adjust the airflow by pushing the sliding
block up and down.

Use and Operation

2. Insert hose connector into the blowing mouth when you
want to use its blowing function. Connect all the accesso-
ries as picture shows.
Bristle for Windows,
table, etc.
Crevice nozzle for
crevice, corner, etc.
8