Adjusting The Motion Sensor - Commercial Electric 53602141 Manual De Uso Y Cuidado

adjusting the Motion sensor

The amount of time the light remains on after the person has left the detected area can be adjusted.
□ Slide the switch to the desired position to select the hold-time.
□ Move the toggle switch on the inside of the fixture to make your selection before attaching the diffuser shade (B).
nOTiCe: The factory setting for the hold-time is 5 minutes.
The Motion Sensor Detection Area varies with the height at which the fixture is installed.
nOTiCe: The maximum distance from the motion sensor to the Motion Sensor Detection Area is 16 ft.
The motion sensor can be turned horizontally from left to right.
15 min. 5 min.
Max 270°
Sensing Range
10-13 ft.
2 min.
The motion sensor can be tilted up and
down vertically.
6
Max 90°