brennenstuhl TORAN 3050 MB Manual De Instrucciones página 8

Operating Instructions
RESETTING THE BLUETOOTH FUNCTION AT THE DEVICE
If a TORAN floodlight is connected to a smartphone, no other smartphone can access the same
floodlight. The floodlight will also retain its settings if the smartphone is out of reach.
If in this situation, a different user wants to use the floodlight by means of the app, they can reset
the connections and settings of different users by keeping the blue Bluetooth button pressed for
more than 5 sec.
SWITCHING THE FLOODLIGHT ON/OFF MANUALLY
Switch the floodlight on by means of the yellow button at the back side.
The floodlight lights with 100 % brightness. By pressing the button again, the light will change
to 50 % brightness. The light intensity can also be continuously set. To do so, keep the switch
pressed – the light intensity is slowly reduced.
Proceed in the same way to increase the intensity again.
If the switch is left in any of its "on" positions for longer than 3 seconds, then pressing it once
again will always turn it off.
A: On/Off and function switch
B: Connection cable
C: Power socket (only TORAN 50XX MB)
D: Bluetooth switch
E: Bluetooth status LED
MAINTENANCE
8 8
20P124 Mobiler Bluetooth LED Strahler TORAN 3050 MB 5050 MB 5051 MB 0532845 210521.indd 8 20P124 Mobiler Bluetooth LED Strahler TORAN 3050 MB 5050 MB 5051 MB 0532845 210521.indd 8
TORAN 3050 MB 5050 MB 5051 MB
E
D
C
ATTENTION: The LED lamp does not contain
components that require maintenance. The light
source in this lamp cannot be replaced; If the
light source has reached the end of its service
life, the entire lamp has to be replaced. The lamp
may not be opened.
A
B
21.05.2021 14:56:10 21.05.2021 14:56:10