sauermann SI-CA 130 Guia De Inicio Rapido página 5

Set the time then
tap "Next".
The probe can be inserted in the chimney.
The analyzer displays the measurements.
5 ON / OFF
During autozero DO NOT insert the gas probe in the chimney.
Keep pressed for 3 seconds to turn on the analyzer.
Once the autozero is finished, insert the gas probe in the chimney
and gas measurments are displayed.
Keep pressed for 3 seconds to turn off the analyzer.
Before powering off, disconnect hoses from the analyzer and
empty and dry the water trap.
Set your time zone
then tap "Next".
Select if you want
Autozero is in progess.
your pump turned
ON or OFF after
Auto-Zero then tap
"Save".