Ebode EMML Guía Del Usario página 7

Transmitter - Micro Remote Control Module
PROGRAMMING
In order to add the Micro Transmitter to a different installation from
the original one, or to one with interference from a nearby system,
it is necessary to program a different code.
The programming address is made up of a "HOUSE" code (from A through P) and
a "UNIT" code (from 1 through 16). The factory default address of the transmitter/
receiver pair is set at A1; proceed as follows to set a different code.
A. Accessing programming mode.
- Press the Micro Transmitter's START (1) and STOP (0) buttons briefly and
simultaneously. The LED turns YELLOW.
July 2009 page 7
Ref : EMML
EMML