Publicidad
support@nextlevelracing.com
7.0 Remove the pre-installed nut and bolt from the hub then install the adjuster plate. Re-install
the nut and bolt previously removed.
MOUSE PLATE
THROTTLE PLATE
8.0 Install large mouse/throttle plate using the nylon spacers between the mouse/throttle plate
and adjuster plate securing with washers and nuts.
9.0 Attach the optional support bar under the mouse plate using M5 60mm bolt and wing nut.
PARTS
NIL
PARTS
8 X M6 30MM FULLY THREADED STUD
8 X 10MM NYLON SPACER
8 X M6 FLANGE NUT
PARTS
1 X M5 60MM BOLT
1 X M5 WING NUT
10
10.0
YOKE
SETUP
10.0 Install M6 studs to the flight plate then using the nylon spacers between the flight plate and
wheel plate secure with washers and nuts.
10.1
KEYBOARD
SETUP
10.1 (optional) Bolt keyboard bracket on top of the wheel plate then bolt the other keyboard
bracket underneath the wheel plate.
Video Instruction: bit.ly/nlrbuild
PARTS
10.0 YOKE SETUP
3 X M6 30MM FULLY THREADED STUD
3 X 10MM NYLON SPACER
3 X M6 FLANGE NUT
PARTS
10.1 KEYBOARD SETUP
2 X M6 CONTERSUNK BOLT
2 X M6 15MM BOLT
4 X M6 FLANGE NUT
11
Publicidad
