Publicidad
Idiomas disponibles
Idiomas disponibles
120S
Section 3
40S
80S
Section 2
100S
80S
Section 1
80S
Operation
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for any
loose plugs and/or broken, loose, or missing bulbs.
Replace bulbs promptly with the replacement bulbs
provided in order to maintain the performance and life
expectancy of your tree.
Step 1. Connect the light strings of the tree together
and plug the power cord into a wall outlet.
Step 2. If the tree comes with a foot pedal, step on the
On/Off button.
Maintenance
Spare parts
This tree package includes hinge pins, washers, bulbs,
and fuses for any replacement or repair that you need to
perform on your tree. If extra parts are needed, contact
the Customer Service Team at 01 800 004 6633
Repairing Loose Hinges
Step 1. Place the branch into the slot of the bracket
Step 2. Insert a new hinge pin through the holes of the
bracket and secure with a washer.
Use and Care Instructions
1. Before using or reusing, inspect product carefully.
Discard any products that have cut, damaged or
frayed wire insulation or cords, cracks in the
lampholders or enclosures, loose connections, or
exposed copper wire.
2. Before disassembling the tree, unplug the tree and
remove all ornaments and decorations.
Do Not Tamper
Internal Parts
Open the
protective
cover
Do Not Tamper
Internal Parts
Open the
protective
cover
Adaptor
To Be Plugged
Into Wall
Outlet
Control box
Foot Pedal
on/off Switch
Model: TG76P3739P00; 117629
3. Gently lift the tree top straight up to remove from the
center section and fold all branches towards the pole.
4. Repeat this step for the center and bottom tree
sections.
5. When storing the product, carefully remove the
product from wherever it is placed, including tree,
branches, or bushes, to avoid any
undue strain or stress on the product
conductors, connections, and wires.
Cover the protective cap on the
poles to avoid damaging the internal parts.
6. When not in use, store neatly in a cool, dry location
protected from sunlight.
User servicing instructions
HOW TO USE THE COLOR SHOW CONTROLLER:
Press the selector button on the "Color Show Light
Controller" to select among
(1) CLEAR LIGHTS ;
(2) COLOR - SHOW LIGHTS ;
(3) CLEAR-COLOR SHOW LIGHTS and ;
(4) TURN OFF BOTH LIGHTS.
Troubleshooting
Problem
Solution
Ensure that all tree sections are plugged
The tree
into each other and that the tree is
does not
plugged into the wall. If your tree came
light
with a foot pedal, step on the
On/Off button.
Check for blown fuses at the light string
and power cord plugs. Replace as needed
with the replacement fuses provided.
Check for loose, broken, or missing bulbs
and replace as needed with the
replacement bulbs provided
The appliance is not to be used by persons (including
children) with reduced physical, sensory or metal
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction
Children should be supervised to ensure that they do
not play with the appliance
CAUTION:
Use only power adaptor that was provided with this
product. Using a different power adaptor will damage
the lights and cause fire, electrical shock hazard.
Denison Tree
Selector
Button
Light
Controller
Publicidad
