Turning On; Standby/Automatic Switch-Off; Battery Life And Standby Time; Battery Almost Empty - Marmitek BOOMBOOM 75 Modo De Empleo

3.7

Turning on

Depress the BoomBoom 75's button for 4 seconds. The blue LED
will blink 3 times.
The BoomBoom 75 will then automatically link to the last device it
was connected to. Only 1 device can be connected at once with
the BoomBoom 75. If your device does not connect automatically,
go to the device's Bluetooth settings and select the BoomBoom
75. A connection will then be made.
3.8

Standby/automatic switch-off

If the BoomBoom 75 is in connecting mode and no connection is
made within 3 minutes, the BoomBoom 75 will switch to standby
setting (blue LED blinks). If no connection is made for 10 minutes,
the BoomBoom 75 will automatically switch off. If you wish to use
the BoomBoom 75, you must switch it on again.
3.9

Battery life and standby time

Once the battery has been fully charged it will last for about 10
hours. Standby time is around 280 hours. You can use the
BoomBoom 75 with the mains adapter supplied. The battery then
remains charged.
3.10

Battery almost empty

When the BoomBoom 75's battery is almost empty, the red LED
will blink once every 30 seconds and you will hear a warning
signal 4 times via the sound system. Follow the steps given earlier
to charge the battery.
BoomBoom 75 7