Battery Charger Safety; Electric Screwdriver Safety - GMC DEC002SD Manual Del Usuario

Electric Screwdriver Safety

• If possible, always use clamps or a vice to hold your work
• Allow the tool to come to a complete stop before you put the tool down
• Only use accessory bits that are in good condition

Battery Charger Safety

Use the battery charger correctly
• Refer to the section of this manual relating to use of the battery
charger before attempting to charge the battery
• Do not attempt to use the charger with any batteries other than
GB
those supplied. Keep your battery charger clean; foreign objects
or dirt may cause a short or block air vents. Failure to follow these
instructions may cause overheating or fire
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard
WARNING: Do not recharge non-rechargeable batteries
Use batteries correctly
• Only charge batteries using the charger provided. Only use batteries
provided with this power tool, or others recommended by the supplier.
Keep batteries clean; foreign objects or dirt may cause a short. Allow
batteries to cool for 15 minutes after charging or heavy use. Failure
to follow these instructions may cause overheating or fire
• When not in use batteries should be stored at room temperature
(approx. 20˚C). Ensure that batteries cannot accidentally short in
storage
8