Kohler K-8501 Guia Del Usuario página 3

Reduced Flow - Relaxing Spray
With water running through the showerhead, firmly rub your
finger back and forth across the spray holes in the face of the
showerhead to dislodge debris and mineral build-up. This may be
all that is needed.
With the water turned off, insert the showerhead tool (provided)
into the holes on the face of the showerhead. Firmly turn the tool
counterclockwise to loosen the aerator housing.
Carefully remove the aerator housing, rubber gasket, and aerator
plate. Clean both sides of the aerator.
Align the notches in the aerator with the keyways in the aerator
housing to reassemble.
Insert the aerator plate into the aerator housing with the
small-diameter ring first. Align the aerator plate notches with the
aerator housing keyways.
Reinstall the rubber gasket into the aerator housing.
Carefully thread the aerator housing into the showerhead with
the showerhead tool.
If this fails to improve the performance of the product, proceed to
the Screen Washer section.
Kohler Co.
Gasket
Aerator Plate
Aerator
Notches
Aerator
Housing
3
Showerhead
Tool
1016116-5-AD