GE 5-2509 Guía Del Usario página 29

Memory Dialing
doesn't work
C ID
ALLER
Problem
No Display
Caller ID Error Message
A S
NSWERING YSTEM
Problem
Can't hear messages,
beep, etc.
Time/Day setting
stuck at 12 a.m Mon.
Answers on 10th ring
Incoming messages
are incomplete
Won't respond to
remote commands
• Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?
Solution
• Is battery fully charged? Try replacing the battery.
• Make sure that the unit is connected to a non-switched
electrical outlet. Disconnect the unit from the plug and
plug it in again.
• Did you order Caller ID service from your local telephone
company? The display won't work unless you order Caller
ID service from your phone company.
• The unit displays this message if it detects anything other
than valid Caller ID information during the silent period
after the first ring. This message indicates either the
presence of noises on the line, or that an invalid message
has been sent from the telephone company.
S
OLUTIONS
Solution
• Adjust speaker volume.
• Set the time clock.
• Make sure answering system is turned on.
• Memory may be full.
• Was an extension phone picked up?
• Memory is full.
• Accidentally pressed play/stop button during playback and
stopped message.
• Must use tone-dial phone.
• Must enter correct security code.
• Did unit hang up? If you take no action for a period of time,
it automatically hangs up.
29