Motor Specifications And Electrical Requirements; Electrical Cord Care - ProTeam ProBlitz Manual Del Usuario

SP6769-1 PROTEAM ProBlitz 8/15/11 9:19 AM Page 5
MOTOR SPECIFICATIONS AND
ELECTRICAL REQUIREMENTS
115 Volt, 60 Hz. Air Mover Information
This air mover is provided with a 3-speed, 115 volt, 60 Hz induction motor with a
grounding conductor. It is thermally protected and will automatically shut down if
over-heated. Once it cools, the motor will restart automatically if not unplugged.
In the event of a malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This air mover is
equipped with an electric cord having an equipment grounding conductor and a
grounding plug. The plug must be plugged into a matching outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
Do not modify the plug provided. If it will not fit the outlet, have the proper outlet
installed by a qualified electrician.

ELECTRICAL CORD CARE

When air mover use is complete, unplug the cord and wrap it around cord wrap tabs
on top of the housing. If the power cord is damaged, it must be replaced by
ProTeam or the local ProTeam authorized dealer to reduce the risk of accident.
NEVER stretch the cord tightly between the air mover and the outlet. A cord that is
stretched or pulled will not function properly and creates an electrical and tripping
hazard.
DO NOT wind up the cord by wrapping it around your hand and elbow.
Use only the designated ProTeam replacement cord.
Cord jacket type should be SJTW or better.
ProTeam 5