Sound4you 661699 Manual Del Usuario página 17

NOTE:
• In AUX-IN mode, the "Skip Songs" and "Handsfree"
functions are not available. In this mode, operation is
exclu-sively via the connected playback device.
• To return to Bluetooth® mode, simply pull the 3.5 mm
jack cable out of the socket on the loudspeaker.
Resetting the speaker
If you experience problems with the speaker, you can
easily reset it. To do this, discon-nect it from the charger
cableand gently push a thin needle (diameter <3 mm) into
the RESET hole provided for this purpose for 2 seconds
untilthe status LED light goes out. The RESET hole is
located on the back of each speaker next to the AUX input.
Troubleshooting
Speaker does not turn on
Charge the speaker and make sure it has enough power.
Speaker does not connect to my device
Please check the following:
The Bluetooth® device supports Bluetooth® A2DP
profiles; the speakers are within 10 m or less of your
device; Theloudspeaker is in pairing mode (LED status
light is blue).
No sound
Make sure that the volume on both the speaker and your
device is set to an audible level. Make sure that your de-
vice is successfully connected to the speaker. The Status
LED light is permanently blue.
Poor sound quality
Reduce the distance between the speaker and your device
and remove any ob-structions in between.