oneConcept 10030530 Manual Del Usuario página 18

onto the Round rack.
2. Plug in the power, according the the RECIPE, turn the Timer knob to the right position,
the red indicator on, the Pizza oven start working.
3. First, preheat for 2-3 minutes, then place the prepared pizza, cake or cookies evenly
on the Pizza plate, then put it onto the Round rack. If only roast one plate of pizza at
one time, please put the Pizza plate onto the down-side round shelve of the Round
rack and switch to
If roast 2 plates of pizza at the same time, please put the Pizza plates both on the
upper-side and down-side round shelves of the Round rack and switch to
4. The Timer autozero and sound "ding", the roasting is finished.
Notes:
• The Pizza Oven sides and top are hot, always wear protective, insulated oven mitts
or temperature resistant gloves when removing the food from the hot Pizza oven to
avoid scald.
• If the "S" square shaft of the Round rack impede taking out the food from the Pizza
Oven, please turn the Timer knob on, let the
• "S" square shaft moving slowly to the range of the inner cavity, then turn the Timer
knob to "Off" and take out the food.
• Cut off the power.
Using Your Pizza Oven with Food tray
If the Pizza Oven comes with multi-use Food tray, please follow the instructions for use.
With Round rack (Note: the small steel bar round shelves) and food tray can roast a va-
riety of steak, pork chops, fish, seafood, chicken wings, etc. The thickness of the roasted
food should not exceed 3.5 cm.
Using the oven with the food tray is just like with the pizza plate. Instead of using the pizza
plate use the food tray.
18
.
.