Pro-Fix System - nurse MOON PRO Instrucciones

GB
Assembly instructions
1
Release the storage latch as per Figure 1.
2
Pull the handle away from the rear legs as per Figure 2.
3
Continue this action until the frame is completely open and both locks have fully engaged, as per Figure 3.
4
Line the toothed hole up with the axle and press until you hear it click as per Figure 4.
5
Press the button and pull the wheel to detach the rear wheel as per Figure 5.
6
Insert the front wheel spike into the plastic base as figure 6 until you hear it click .
7
Press the button and pull the wheel to detach the front wheel as per Figure 7.
8
Pass the canopy through the handle and zip it up.
9
Insert the hood fastening part into the guide runner on the sides of the ear flaps as figure 9 to fix it.
10
Pull the canopy as figure 10 to detach it.
11
Push the bumper bar onto the bumper bar mounting brackets as per Figure 11. Ensure the bumper bar has
locked into position by pulling forward on it.
12
To remove the bumper bar, press the release buttons on each side of the bumper bar mounting bracket,
then pull out on the bumper bar, as per Figure 12.
13
Insert the tubes at both sides as figure until you hear clicks as per Figure 13.
14
Push down on the brake bar to engage the brake as per Figure 14.
15
Lift up on the brake bar to release the brake as per Figure 15.
16
To adjust the backrest position, press the backrest lock, then adjust the backrest to the required position
as per Figure 16.
17
To re-position the leg rest, press the button on each side of the leg rest, adjust to the desired angle, then
release each button as per Figure 17.
18
Standing behind the stroller, fold back the canopy, pull the second lock upwards and keep it, then pull back
on both folding locks simultaneously as per Figure 18.
19
Push the handle forward with one hand as per Figure 19.
20
Hold back the front bumper bar by the other hand as per Figure 20 to close the stroller.
21
Finally, ensure the fold lock has engaged as per Figure 21.
22

PRO-FIX SYSTEM

The chassis of your pushchair includes the PRO-FIX system, ready to fit the following the security elements of
the Jané Group. The PRO-FIX system makes it easy to fit and detach these accessories on and off the chassis,
quickly, simply and safely locking them securely onto the chassis. To do this, carefully follow the instructions for
these accessories.
MAINTENANCE
Keep the metal parts clean and dry to prevent rusting. Grease the mobile parts and mechanisms
regularly with a silicone based spray. Do not use oil or grease. To clean the plastic parts just use
mild detergent and warm water. Do not expose the upholstery to sunlight for long periods of time.
The upholstery may be taken off for washing.
IM 1995,0 MOON pro ins.indd 11
INSTRUCTIONS
11
9/3/17 13:17