from the appliance it should be situa-
ted in a place where the atmospheric
temperature is between 12 and 32ºC.
Instructions for use
Before use:
- Make sure that all the product's
packaging has been removed.
- Ensure that the selected tension on
the voltage selector coincides with
the tension of the mains.
Use:
- Unroll the cable completely before
plugging it in.
- Connect the appliance to the mains.
- Use the rotator switch to turn the
appliance on and to choose one of
three positions – fan and heater
position "I" and "II".
- Use the rotator switch for thermos-
tat to choose the comfortable power
oh heating (Fig 1).
-The pilot light (D) comes on.
- During the appliance's use the
pilot light (D) will come on and off
automatically, indicating the heating
elements are working, and therefore
maintaining the desired temperature.
Fan function:
- Select the fan position.
- Check that the thermostat rotatory
switch is set to the maximum.
Heater function:
- Select the heater position.
- Select the desired heating power.
- Check that the thermostat rotatory
switch is set to the temperature
required
Tropicano 2400.indb 14
Once you have finished using the
appliance:
- Select the minimum position (MIN)
using the thermostat rotatory switch
control.
- Stop the appliance, selecting posi-
tion 0 on the rotator switch control
- Unplug the appliance from the
mains.
- Clean the appliance.
Carry handle/s:
- This appliance has a handle on the
back to make it easy and convenient
to transport (Fig. 2).
Safety thermal protector:
- The appliance has a safety device,
which protects the appliance from
overheating.
- When the appliance switches itself
on and off repeatedly, for reasons
other than the thermostat control,
check to ensure that there are no
obstacles that impede correct air
entry or expulsion.
- If the appliance turns itself off and
does not switch itself on again, dis-
connect it from the mains supply, and
wait for approximately 15 minutes
before reconnecting. If the machine
does not start again seek authorised
technical assistance.
Cleaning
- Disconnect the appliance from the
mains and allow it to cool before
undertaking any cleaning task.
- Clean the electrical equipment and
the mains connection with a damp
cloth and dry. DO NOT IMMERSE IN
WATER OR ANY OTHER LIQUID.
29/06/11 11:58