Publicidad
Idiomas disponibles
Idiomas disponibles
SHORT CORD PURPOSE
NOTE: A short power cord is
provided to reduce the risk of
personal injury resulting from
becoming entangled in or tripping
over a longer cord.
Longer power-supply cords or
extension cords are available and
may be used if care is exercised in
their use.
POLARIZED PLUG
If this appliance is equipped with a
polarized plug
(one blade is wider
than the other), please follow the
below instructions:
To reduce the risk of electrical
shock, this plug is intended to fit
into a polarized outlet only one
way. If you are unable to fit the
plug into the electrical outlet, try
reversing the plug.
PARTS & FEATURES
If an extension cord is used: (1) the
marked electrical rating of the
extension cord should be at least as
great as the electrical rating of the
product; (2) the extension cord
should be arranged so that it will not
drape over the countertop or
tabletop where it can unintentionally
be pulled on or tripped over by
children or pets.
If the plug still does not fit, contact a
qualified technician. Never use the
plug with an extension cord unless
the plug can be fully inserted into the
extension cord. Do not alter the plug
of the product or any extension cord
being used with this product. Do not
attempt to defeat the safety purpose
of the polarized plug.
2
OPERATING INSTRUCTIONS
To Open Cans:
1.
Plug the Can Opener into a
working outlet.
2.
Fit the Can Opener Handle into
the keyhole on the Main Body.
3.
Lift the handle to a vertical
position and place rim of can on
top of the drive wheel next to
the Blade, allowing the magnet
to make contact with the lid of
the can.
4.
Press Can Opener handle down
to pierce lid and begin cutting
action. Hold lever down to
continue cutting.
Dented Cans: Occasionally, dented cans can cause the can opener to stall. If
this happens, grasp the dented can and guide it through the cutting action
manually until the damaged areas are passed.
Jammed Cans: To open a can that has become jammed, raise the can opener
handle and release the can. Begin the cutting action again in a new place on
the can lip.
To Open Bottles:
1.
Be sure the metal lid to the bottle is clean.
2.
Hold the bottle and put the metal lid to the metal hook on the body
of the can opener.
3.
Pull bottle down to remove the lid.
To Sharpen Knives:
1.
Make sure knife is free of
grease, water or any other
substance and is clean and
dry.
2.
Insert knife blade into the
sharpening slot located on
the back of the Can
Opener.
5.
Release lever and Can Opener
will stop cutting.
NOTE: It is normal for the motor
to occasionally continue cutting
for a few seconds after lid has
been severed.
6.
To remove can, grasp it firmly
and raise the Can Opener Handle.
Slide lid from magnet and
discard.
CAUTION: The severed can lid is
very sharp. Always use caution
when handling and discarding.
3.
Draw the blade slowly towards
you while pressing against the
abrasive stone.
4.
Repeat as necessary until
desired sharpness is achieved.
CAUTION: NEVER attempt to
sharpen any hollow ground
blades or blades with serrated
edges.
3
Publicidad
