Serene Innovations SEREONIC BT-200 Guia De Funcionamiento página 9

DOLBY DIGITAL 5.1 and PCM
(PULSE CODE MODULATION):
Newer TVs have the option to set digital audio output to either
Dolby or PCM (you can find what type of output your TV has in
the audio/sound section of your TV menu). The SEREONIC
TV-SoundBox only works with PCM digital audio format. If you
are using the Optical Audio connection as shown in Fig. 4, set
your TV to PCM digital output. If your TV does not support PCM
audio format and can only output Dolby Digital, you will need to
use a Digital to Analog converter as shown in Fig. 5. Please
note that some streaming services such as Netflix or other
similar services will at times stream a program with Dolby
Digital audio format.
PLACEMENT OF THE SEREONIC
TV-SoundBox BASE:
It is recommended to place the Base of the SEREONIC
TV-SoundBox on top of your TV stand next to your TV as shown
below.
Copyright 2020 Serene Group, Inc. All rights reserved.
CHARGING:
Place the Speaker on the Base as shown below for 4+ hours
before first use. During charging, the low battery/charge green
LED indicator blinks. When the Speaker is fully charged, the
green LED will stop blinking and stay steadily lit. A fully charged
battery will provide you about 7.5 hours of listening time at
moderate volume.
When the Speaker is not in use or when the low battery indicator
blinks, place the Speaker back on the Base for recharging.
08.