Safety Guidelines; Safety Symbols; Important Safety Information; Instructions Pertaining To A Risk Of Fire, Electric Shock, Or Injury - CH CHN71500 Manual De Instrucciones Y Lista De Piezas

Operating Instructions and Parts Manual

Safety Guidelines

This manual contains
information that is very
important to know and
understand. This information
is provided for SAFETY and
to PREVENT EQUIPMENT
PROBLEMS. To help recognize
this information, observe the
following symbols.
Danger
indicates an
imminently hazardous situation
which, if not avoided, WILL result
in death or serious injury.
Warning
indicates a
potentially hazardous situation
which, if not avoided, COULD
result in death or serious injury.
Caution
indicates a
potentially hazardous situation
which, if not avoided, MAY result in
minor or moderate injury.
Notice
indicates
important information, that if not
followed, may cause damage to
equipment.
NoTe: Information that
requires special attention.

Safety Symbols

The following Safety Symbols
appear throughout this manual
to alert you to important safety
hazards and precautions.
Wear Eye Read Manual
and Mask First
Protection
Risk of Falling Wear Eye
Protection
Risk of Fire Risk of
Explosion
4
www.chpower.com

Important Safety Information

INstruCtIoNs PertaININg to a rIsk oF FIre, eleCtrIC sHoCk, or
INjury to PersoNs
This manual contains important safety, operational and maintenance information. If
you have any questions, please call 1-800-543-6400 for customer assistance.

CalIForNIa ProPosItIoN 65

harm. Wash hands after handling.
other masonry. This dust often contains chemicals known to cause cancer, birth
defects, or other reproductive harm. Wear protective gear.

geNeral

a. To reduce the risks of electric shock, fire, and injury to persons, read
all the instructions before using the tool. Failure to follow warnings,
dangers, and cautions could result in DeATH or SeRIoUS INJURY.
b. Be thoroughly familiar with the controls and the proper use of the
equipment. Follow all instructions. Contact your Campbell Hausfeld representative
if you have any questions.
c. Only persons well acquainted with these rules of safe operation should be allowed
to use the unit.
on the nailer magazine and body.
the work area in case of accidental discharge of nails. Do not point the tool toward yourself or
anyone whether it contains fasteners or not. Accidental triggering of the nailer could result in
death or serious personal injury.
shields or guards are removed or altered. Do not use the nailer as a hammer. Personal injury or
tool damage may occur.
Tool performance or durability may be reduced.
Risk of

Work area

Personal
Injury
a. Keep the work area clean and well lighted. Cluttered benches and dark areas
increase the risks of electric shock, fire, and injury to persons.
b. Do not operate the tool in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. The tool is able to create
Wear Hearing
sparks resulting in the ignition of the dust or fumes.
Protection
c. Keep bystanders, children, and visitors away while operating the tool.
Distractions are able to result in the loss of control of the tool.
Risk of Shock
When using tools, basic precautions should always be followed,
including the following:
This product or its power cord may contain chemicals known to the State
of California to cause cancer and birth defects or other reproductive
You can create dust when you cut, sand, drill or grind
materials such as wood, paint, metal, concrete, cement, or
Do not operate or allow anyone else to operate the nailer if any warnings
or warning labels are not legible. Warnings or warning labels are located
Always assume the nailer contains nails. Respect the tool as a working
implement; no horseplay. Always keep others at a safe distance from
Do not make any modifications to the tool without first obtaining
written approval from Campbell Hausfeld. Do not use the nailer if any
Clean and check all air supply hoses and fittings before connecting the
nailer to an air supply. Replace any damaged or worn hoses or fittings.
CHN71500