Features - RIDGID R7131 Manual Del Operador

FEATURES

PRODUCT SPECIFICATIONS
Coupler .................................................................... 13 mm
Input .......................... 120 Volts, AC only, 60 Hz, 10 Amps
KNOW YOUR MUD MIXER
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating functions.
BUCKET GUARD
The bucket guard provided secures the mixing paddles
and prevents the material being mixed from splashing onto
the mixer and prevents the tool from falling into the mixing
container.
CUSTOM MODE
The mixer can be programmed to turn on and off at custom
intervals. The unit can store up to 10 custom mix sets.
NOTE: The bucket guard should be properly seated on the
bucket before attempting any custom or preset operation.
If the bucket guard is not seated properly, the mud mixer
may not perform these operations correctly.
DIGITAL DISPLAY
The digital display shows the current mode and mixing
options selected on the tool.
HANDLE
This mixer has an ergonomic handle design for ease of
operation and to prevent loss of control.
LOCK-ON BUTTON
This tool is equipped with a lock-on feature for continuous
mixing.
MANUAL MODE
The mixer can be manually operated using the switch trigger.
NOTE: If the mixer is performing a custom or preset
operation, squeezing the trigger will cancel the operation
and return the unit to manual mode.
MIXING PADDLES
The mixing paddles are designed to mix thick and heavy
materials.
NOTE: This mud mixer is designed for use with the included
RIDGID mixing paddles only (model no. AC7131N). Do not
use any paddles not recommended by the manufacturer of
this product.
No Load Speed ...................................Low 300-460 r/min.
PRESET MODE
The mud mixer has eight preset mixing sets for some of the
most commonly mixed materials including paint, thinset,
and mortar.
NOTE: The bucket guard should be properly seated on the
bucket before attempting any custom or preset operation.
If the bucket guard is not seated properly, the mud mixer
may not perform these operations correctly.
PROGRAM BUTTON
The program button allows the user to choose between
different modes and select preset and custom mix sets.
STAND COMPATIBLE
The mud mixer can be mounted to the R7133 stand (not
included).
WARNING:
To reduce the risk of the tool falling into the material
being mixed, ensure that the mud mixer is secured
to the stand (not included) and the bucket guard
is in place prior to beginning operations. Failure
to comply could result in a hazardous condition
leading to possible serious personal injury.
TWO SPEED GEAR TRAIN
The mud mixer has a two-speed gear train designed for
mixing at LO (1) or HI (2) speeds. A dial is located in the
center of the tool to select either LO (1) or HI (2) speed.
QUICK-CONNECT COUPLERS
The quick-connect couplers allow you to easily add/remove
paddles.
VARIABLE SPEED SELECTOR
The mixer speed can be adjusted with the variable speed
selector. This allows you to adjust the mixing rate to suit
your particular application.
NOTE: The speed cannot be adjusted during preset
operation.
6 - English
High 400-620 r/min.