Standard Equipment - Virutex WEGOMA CF217S Manual De Instrucciones

Sie das Produkt zur umweltgerechten und sicheren
Entsorgung bringen können.
Wegoma by Virutex behält sich das Recht vor, die
Produkte ohne vorherige Ankündigung zu verändern.
E N G L I S H
CF217S ANGLE AND CORNER
TRIMMER
Important
Read these OPERATING INSTRUCTIONS
and the attached GENERAL SAFETY
INSTRUCTIONS LEAFLET carefully before
using the machine. Make sure you have
understood them before operating the
machine for the first time.
Keep both sets of instructions for any
future queries.
1. SAFETY INSTRUCTIONS FOR
OPERATING THE TRIMMER
- Before plugging in the machine, ensure that the power
supply voltage corresponds to what is stated on the
machine's characteristics plate.
- Always keep your hands away from the cutting area
and grip the machine by its main body
- It is recommended to use the machine attached to a
dust collector in order to prolong the life of the bit and
prevent possible damage to it.
- Unplug the machine from the electrical outlet before
performing any maintenance operations.
- Always use original Wegoma by Virutex spare parts.
- Use only bits of diameter suitable for the chuck to be
used, and adapted to the router speed.
2. SPECIFICATIONS
Input power........................................................................1000 W
Universal motor.............................................................50/60 Hz
No-load speed.....................................14,000-30,000/min
Chuck collet...........................................................................8 mm
Weight...................................................................................1.6 kg
Weighted equivalent continuous
acoustic pressure level A..................................................88 dBA
Acoustic power level A.......................................................99 dBA
Uncertainty...................................................................K = 3 dbA
Wear ear protection!
Vibration total values..............................................a
Uncertainty....................................................................K: 1.5 m/s

3. STANDARD EQUIPMENT

Inside the box of CF217S for solid surface you will find
the following items:
1. CF217S Angle trimmer
2. Carbide bit R:5
3. Carbide bit R:10
4. 11-mm a/f key for motor shaft
5. 19-mm a/f key for the chuck collet
6. 3-mm Allen key
7. Dust collection pipe
8. Cable - dust collection tube brackets
9. Operating instructions
Inside the box of CF217S Corner trimmer you will find
the following items:
1. CF217S Corner trimmer
2. Carbide bit 90º D.12
3. 11-mm a/f key for motor shaft
4. 19-mm a/f key for the chuck collet
5. 3-mm Allen key
6. Dust collection pipe
7. Cable - dust collection tube brackets
8. Operating instructions
4. GENERAL DESCRIPTION AND APPLICATIONS
ANGLE TRIMMER
For trimming the concave radiuses in the joints between
rims and work tops made of materials such as Corian
or Rausolid. Fitted with a front feeler that prevents the
rim from becoming damaged and allows for quick, easy
trimming, giving a perfect finish.
CORNER TRIMMER
For trimming excess left in corners following the re-
sanding of parquet floors.
To trim excess in corners with the skirting board already
installed, the machine incorporates a copying device
which is in front of and above the bit blade, thereby
preventing damage to the skirting board.
The machine comes equipped with a dust collector con-
nection, and using the dust collector attachment, it can
be connected to our AS182K and AS282K dust collectors,
or to any other industrial dust collector.
The power cable can be fed through the brackets S (Fig.
11) on the dust collection tube to make the machine
easier to handle.
5. STARTING AND STOPPING THE MACHINE
To start the machine, press button A forward (Fig. 1)
to the "on" position. To stop the machine, simply press
the back of the switch and it will return to the "off"
position. The electronic control enables you to work at
: <2.5 m/s
2
the ideal speed for each type of job and cutter bit. To
h
2
do this, use button B (Fig. 1 and 2).
7