Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Mount System Head
Note: Filter should be 3 feet or less from the
appliance.
Note: To allow adequate space for filter changes,
allow a minimum clearance of 4-6" below the Redi-
Twist™ filter. The filter system must be mounted in
a vertical position.
•
Choose an easy-to-access area
behind the refrigerator.
•
Remove cap from system head.
•
Measure and mark location of
mounting holes.
•
Mount system head to wall of cabinet.
6
Step 2
materials and tools needed
1/8" drill bit
INLET
safety
phillips
drill
safety glasses
tape measure
glasses
screwdriver
CAUTION
Mount system in
vertical position
4-6" FROM BOTTOM
OUTLET
Publicidad
Tabla de contenido
