KRESS KI200 Manual Del Usuario página 12

5. Indirect measurement
The instrument can calculate the
distance using the Pythagorean theorem. This
function allows you to measure distances for
inaccessible locations.
Note:
1. All the points to be measured should be on
the same horizontal or vertical plane. In order
to get more accurate measurement results, it
12
is recommended to use a tripod to rotate the
instrument on the same axis for measurement
EN
(for example, the instrument's corner is fully
unwound against the wall for measurement).
Indirect measurement: Pythagorean
method two points
As shown in the figure below, measure the
height or width of a building, or when a height
needs to be determined by two distances, it
can be achieved by indirect measurement.
1
2