Antop AT-402BV Instrucciones página 5

Step 1. Attach one end of coaxial cable (with waterproof cap) to connector on the antenna.
Step 2. Attach the other end of the coaxial cable to the shorter end (0.3ft) of the power inserter.
Step 3. Attach the longer end (3ft) of the power inserter to the ANTENNA/CABLE IN connector
on the back of the TV or converter box.
Step 4. Connect the power adapter to the DC socket in power inserter.
Reminder: If you are using a Splitter, it should be an all port DC power
passing model. To purchase an Antop all ports DC Power Passing Split-
ter, please call us at 1-909-947-8883. Or go to antopusa.com and visit
our on-line store's accessories page, search "splitter."
LED
!
3 / Setting and Scanning
In the TV's setup menu, set the mode to "Antenna" or "Air", then, set TV to "Scan" for channels.
Consult the TV manual for detailed instructions.
4 / Adjusting Instruction
For the best reception, adjust the direction of antenna.
The
Push the smart switch On or Off and select the switching
with which more channels are received.
·Switch Off - The LED indicates yellow for normal reception.
·Switch On - The LED indicates
OFF/ON
Scan channels after each switching in the power inserter.
CHANNEL SCAN
scanning for channels
Power Inserter
must be powered in order to function.
3
green for stronger reception.
4
4