Deltafox DG-CLM 1833 Set Traducción Del Manual De Instrucciones Original página 26

GB
• Always keep the grass ejection
hole clean and clear. Remove
cut material only when the
equipment is stopped.
• Do not leave the equipment un-
attended in the workplace.
• Do not work with equipment
that is damaged, incomplete, or
has been modified without the
authorisation of the manufac-
turer. Do not use the equipment
with damaged safety devices or
screens or with missing safety
equipment such as deflection
and/or grass collection devices.
• Do not overload the equipment.
Work only within the speci-
fied power range and do not
change the regulator settings
on the motor. Do not use low-
powered machines for heavy
work. Do not use your equip-
ment for purposes other than
those for which it is designed.
• Do not use the equipment near
inflammable liquids or gases.
Non-observance will result in a
risk of fire or explosion.
• Switch the device off, pull out
the safety key and remove the
battery. Check that all moving
parts are at rest:
- Whenever you leave the ma-
chine,
- Before cleaning the ejection
hole or removing blockages,
- When the equipment is out
of use,
- Before checking, cleaning or
working on the equipment,
- If the equipment has hit a
foreign object or if strange
vibrations occur during
work. In this case, check the
26
equipment for damage and
have it repaired if applicable.
- Ensure that all nuts, bolts
and screws are tightened
firmly and the equipment is
in safe working condition.
• Check the mower for any dam-
ages.
• Repair damaged parts as ap-
propriate.
• Do not place feet or hands near
or verwendet wird, under rotat-
ing parts. Do not stand in front
of the grass ejection hole dur-
ing sickle mowing.
• Always pull the circuit breaker/
ignition key if:
- You leave the garden de-
vice, before removing block-
ages,
- if you are examining, clean-
ing or working on the garden
device
- after a collision with a for-
eign object. Immediately
examine the device for dam-
ages and if necessary have
it repaired,
- if the garden device starts to
vibrate unusually (check im-
mediately!).
Maintenance and Storage
• When servicing the blades,
remember that they can move
even if the power source is off.
• Ensure that all nuts, bolts and
screws are tightened firmly and
the equipment is in safe work-
ing condition.
• Check the mower for any dam-
ages.