Operating Instructions - LF Kobalt SGY-AIR131TZ Manual Del Usario

ASSEMBLY INSTRUCTIONS
4. Mount a 3/8 in. to 1/2 in. adapter (not provided)
onto the anvil (B) if necessary, and then choose
the correct impact socket (not provided) as
needed and mount it onto the adapter.
(See Figure 4)
Only use adapter and sockets that have a torque
rating equal or greater than the tool itself.
Before using tool, always make sure attachments
are properly mounted/secured. If attachments are
not properly mounted/secured, they can present
a serious hazard and may cause bodily injury for
the operator or anyone in or around the work area.
Always follow the attachment
specifications for properly attaching accessories
to tool.
5. Connect air supply hose to the male plug. Set
the working pressure at 90 PSI for best tool
performance. (See Figure 5)
NOTE Working pressure refers to the air line
pressure set to tool when tool is under working
conditions.

OPERATING INSTRUCTIONS

1. To tighten or secure the threaded fasteners/
workpiece, turn the forward/reverse knob (C)
counterclockwise to the forward position. Press
the trigger (D). The tool
tightening/securing the threaded fasteners/
workpiece (See Figure 1).
WA R N I N G
manufacturer's
anvil (B) runs clockwise
4
5
1
11
Counterclockwise