Operation - ATH-Heinl ATH-M M72Z Plus Manual De Usuario

A2
1.3

Operation

1.3.1 Determining the wheel rim cut
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-04
Operating the assist-arm:
The lift truck (A2) can be moved up or down by operating the
control lever (A1).
A1 is the control lever for the upwards and downwards
movement of the assembly roller and bead pusher.
A1
On some wheel rims, the nut in the middle of the wheel rim is
very flat or there is no nut.
This type of wheel rim is not authorised for sale in some
countries.
On some wheel rims, the nut in the middle of the wheel rim is
very deep, meaning that, for assembly or disassembly, the tyre
has to be pushed in very deep. This increases the risk of
damaging the tyre.
Some wheels have a tyre pressure control system. This system
may not be damaged on assembly or disassembly.
Manufacturer ATH-Heinl GmbH & CO.KG
- 7 -