Norcold N10DCX Guia De Inicio Rapido

Kit Contents: K1
D
D1
A1
New Ref. Description
K1 A / A1 Evaporator Fan / Screws, Nuts, Lock washers, and Washers
NI B Upper Shelf
NI C / C1 Shelf Lock / Screws
NI D / D1 Fan Housing / Screws
NI E Wire Harness
NI Not Included: Reference Only
Tools Needed:
■ #2 Phillips screwdriver
■ 7mm Nut driver
■ Refrigerator Service Manual
This procedure is to be performed by
WARNING
!
authorized service personnel only. Im-
ATTENTION
proper installation, adjustment, alteration,
service or maintenance can cause injury
or property damage.
P.O. Box 1285
Ann Arbor, MI 48106
www.norcold.com
N10DCX Evaporator Fan
B
C1
Fig. 1
Remove Part
Refer to Fig. 1.
!
1. Remove all items from
2. Remove
3. To remove
4. Simultaneously push
5. Pull
6. Remove
7. Disconnect
8. Remove
Replace Part
1. Using new part, reverse steps 1-6 to install.
NOTICE
Questions 1-800-543-1219
Service Kit
K1
C
Be sure the appliance has been isolated
WARNING
from the electrical supply before starting!
ATTENTION
B .
C1 (2x) from C ; set aside.
:
B
(2x) inward; remove from slot.
C
straight forward; remove from slot.
B
D1 (4x) from D ; set aside.
A from E .
A1 (2x - each) from D
Make sure the label on center of
facing toward
640093
E
A
A1
D
; set aside.
K1 is
D .
Part No. 640092A (11.27.2018)