Virutex EB140PLC Guía Rápida De Puesta En Marcha página 10

24
25
10 - EB140PLC Premilling / Quick start guide
9) Checking electrical connection.
To check the connection pass a panel following the indica-
tions:
1. Check that the electrical connection light (11) is on.
2. Press the icon operating mode without temperature (19)
and check that the glue is cold.
3. Press the "ON" button (10) in order the "ON" light remains
fixed.
Before switching on the machine for the first time, please
read carefully and follow the instructions explained in the
"FIRST JOB GUIDE".
4. Put a panel on the table (25) and introduce it in the feeder
(24), checking that the feeding is correct.
5. In case the motor turned in the opposite direction it will
be no possible to introduce the panel. Modify the connection
following section 4.5 on the instructions manual.
10) Operation mode with temperature:
• Press icon (18) on the welcome screen.
• Press the "ON" button (10) from the welcome screen.
26. Temperature set by the user.
27. Real temperature of the glue.
28. Back.
26
29. Heating indicator.
28
27
29
If the electrical connection is wrong it can
cause dangerous situations to the user and
irreparable damages to the machine.