Typical Bridge Deployment; Configuration; Configuring The Management Pc - Cambium Networks PTP 550 Serie Guia De Inicio Rapido

Typical bridge deployment

Communications
Building
Power
Supply Unit
(PSU)
AC
Supply
Network
Equipment

Configuration

Configuring the management PC

1
Select Properties for the Ethernet port. In Windows 7 this is found in Control Panel > Network
and Internet > Network Connections > Local Area Connection.
2
Select Internet Protocol (TCP/IP):
3
Click Properties.
4
Enter an IP address that is valid for the 169.254.X.X network, avoiding 169.254.0.0 and 169.254.1.1.
A good example is 169.254.1.3:
5
Enter a subnet mask of 255.255.0.0. Leave the default gateway blank.
Grounding
Conductors
attached to
both ODU
Ground Lugs
Mounting pole
extends at least
1 foot (.3
meters) above
ODU
PTP 550
ODU
Gigabit Surge
Suppressor
(near ODU)
CAT-5 Ethernet Cable for
Power over Ethernet
(PoE) Interface
Gigabit
Surge
Suppressor
Grounding
Conductors
Earth
Ground
PAGE 9
PTP 550 QUICK START GUIDE