Sunjoy Vineyard Manual Del Usuario página 4

Step 1
Attach Base Cover C to Post of Side Panel A.
Attach Stake Base B to Post of Side Panel A; tighten with Bolts AA and Flat Washers BB (Fig.1).
Step 2
Attach Cross Beam D to Side Panel A, tighten with Bolts AA and Flat Washer BB (Fig.2).
Step 3
Attach Middle Cross Beam E to Side Panel A; tighten with Bolts CC,
Step 4
Insert Short Girder G and Long Girder H into the connection tubes of Tilt Top Girder F (Fig.4).
Step 5
Insert Tilt Top Girder F into Top Connection I (Fig.5).
Step 6
Lift the entire top combination, and place onto Side Panels A.
Attach Tilt Top Girder F to Side Panel A; tighten with Bolts DD, Flat Washer BB
EE (Fig.6).
Hardware Pack 2
BB Flat Washer
FF Bolts
GG Bolt
HH Flat Washer
KK Nut
MM Split washer
W2 Wrench
M6 13 PCS
M6X35 13 PCS
M10X65 4 PCS
M10 8 PCS
M10 4 PCS
M10 4PCS
M10 2 PCS
4
JJ and Flat Washer BB (Fig 3).
Split washer LL and Nut