Publicidad
Idiomas disponibles
Idiomas disponibles
Assembling the Blower/
Vacumm Tube
WARNING: Make sure the
ON/OFF switch is in the
OFF Position before tightening
the safety lock knob.
WARNING: Do not loosen
the safety lock knob
rapidly. Turn the knob with
normal speed. Take the turning
time not less than 15s to ensure
the moving parts completely
stop before taking apart the
vacuum tube.
Attaching the Extension Cord
Starting & Stopping
Using the Blower
Adjusting the Blowing Speed
Vacuuming
TROUBLE SHOOTING
Problems
The Blower/
12
Vac does not
operate.
The Blower/
Vac jammed or
clogged.
All-in-One Blower/Vac/Mulcher
See Fig. A &
B1&B2
See Fig. C1 & C2
See Fig. D
See Fig. E1 & E2
See Fig. F
Possible Causes
The Blower/Vacuum Tube is not attached to the
Motor Housing.
Power cord is not connected to the power source.
Debris blocking in the Impeller
Debris blocking in the Blower/Vacuum Tube or
the connection of the Leaf Collection Bag.
Attaching the Leaf Collection
Bag
Attaching the Extension Cord
Starting & Stopping
Using the Vacuum
Emptying the Leaf Collection
Bag
Removing Clogged Debris from
the Impeller(no tool included)
WARNING: Make sure the
ON/OFF switch is in the
OFF Position before loosening
the safety lock knob.
STORAGE
Store the Blower/Vacuum and extension cord
indoors, in a cool dry location, out of reach of
children and animals.
Corrective Action
Attach the Blower/ Vacuum Tube to the
Motor Housing.
Connect the power cord to a power source.
Remove clogged debris from the Impeller.
Remove clogged debris from the Blower
/Vacuum Tube or the connection of the
Leaf Collection Bag.
See Fig. G 1&
G2& G3
See Fig. C1 & C2
See Fig. D
See Fig. H1 &H2
See Fig. I1&
I2& I3
See Fig. J1&J2
EN
Publicidad
