Turning Off; Turning On; Standby/Automatic Switch-Off - Marmitek BOOMBOOM 75 Manual Del Usuario

6. If the Bluetooth connection process requires a password,
enter "0000". The BoomBoom 75 then connects with your
device by briefly lighting up the red LED. You will also
hear a signal via the connected sound system. The
connection has now been made and your device is linked
to the BoomBoom 75. You can now play and control the
music in your device on your sound system.
! You can link to up to 8 devices however only 1 device can be
connected to the BoomBoom 75 at one time.

TURNING OFF

Depress the BoomBoom 75's button for 4 seconds. The red LED
will blink for 3 seconds and then go out.

TURNING ON

Depress the BoomBoom 75's button for 4 seconds. The blue
LED will blink 3 times.
The BoomBoom 75 will then automatically link to the last
device it was connected to. Only 1 device can be connected at
once with the BoomBoom 75. If your device does not connect
automatically, go to the device's Bluetooth settings and select
the BoomBoom 75. A connection will then be made.

STANDBY/AUTOMATIC SWITCH-OFF

If the BoomBoom 75 is in connecting mode and no connection
is made within 3 minutes, the BoomBoom 75 will switch to
standby setting (blue LED blinks). If no connection is made for
10 minutes, the BoomBoom 75 will automatically switch off. If
you wish to use the BoomBoom 75, you must switch it on
again.
BOOMBOOM 75 5