Publicidad
Install the Fixture
1A
COVER SCREW
1
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
2
3
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Secure the fixture to the post with post screws.
4
Screw the lamp into socket. Refer to the label on the socket for Max Wattage Information.
5
Install the provided tape to the ends of the glass, insert the glass into frame, and secure it by ensuring that the tape
6
properly sticks onto the frame.
Place the cover on top of the fixture and secure it in place with the cover screws.
7
COVER
LAMP
7
FIXTURE
3
POST
6
5
7
POST SCREW
4
2
1
2
TAPE
GLASS
Publicidad
