Publicidad
Step 15
Carefully turn your unit over onto its front edges. Unfold
å
the BACK (G) and lay it over your unit.
Line up the bottom edge of the BACK (G) with the
å
BOTTOM (F), then push on opposite corners of your unit
if needed to make it "square".
Fasten the BACK (G) to your unit using the NAILS (1N).
å
NOTE: Be sure to tap NAILS into the holes that line up
å
over the UPRIGHTS (C and D).
NOTE: Perforations have been provided for access
å
through the BACK. Carefully cut out the holes needed.
www.sauder.com/services
This perforation should be
closer to the BOTTOM (F).
F
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
The holes must line up over
the UPRIGHTS (C and D).
G
416511
1N
NAIL
(36 used in this step)
Page 19
Publicidad
