Naxa NPB-207 Manual De Operación página 9

MAINTENANCE
CLEANING CD
If the CD skips or will not play , the disc may need
cleaning . Before playing, wipe the disc from the
centre out with a cleaning cloth. After playing, store
the disc in its case.
CLEANING THE TAPE HEADS
To maintain optimum sound quality, clean the play-
back/record heads ( a ) ,erasure head (b), pinch
rollers (c), and capstans (d) regularly (every 10 hours
of use ). Use a cotton swab lightly moistened with
cleaning fluid or denatured alcohol.
c
DYC686-AF-TCD06-GB ES-NAXA.indd 9
d a b
CLEANING THE CD LENS
If the CD lens is dusty, clean it with a brush-blower.
Blow several times on the lens and remove the dust
with the brush. Finger prints may be removed with a
cotton swab moistened with alcohol.
CLEANING THE UNIT
Do not use volatile chemicals on this unit. Clean by
lightly wiping with a soft cloth.
IMPORTANT NOTE
If an abnormal display indication or an
operating problem occurs, disconnect the AC power
cord and remove the batteries. Wait at least 5 sec-
onds, then reconnect the AC power cord or reinstall
the batteries.
WARNING
Should the CD door be opened before the
reading of the CD completed, a jamming noise may
occur. This is resolved by closing the CD door.
8