Mounting Diagram - Chauvet FlareCON Air Guía De Referencia Rápida

FlareCON Air QRG
AC Power
Mounting

Mounting Diagram

Control Panel
Description
Menu Map
Main Level
Manual Channel
Auto Channel
Input Mode
Information
www.liveline.be
FlareCON Air has an external auto-ranging power supply that works with an
input voltage range of 100 to 240 VAC, 50/60 Hz. It runs on 9 VDC, 500 mA.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
Before mounting this product, read the
The FlareCON Air can be mounted in different ways:
Hung from a pipe with a clamp using the threaded mounting holes
•
Placed on a surface
•
Attached to a pipe or stand using the hook and loop fastener strap
•
Mounted to a surface using the keyhole mounting holes
•
Button
<MENU> Selects an operation mode or exits from the current menu option
Navigates upwards through the menu list or increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list or decreases the
<DOWN>
numeric value when in a function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Enables a search for available Wi-Fi™ channels on the
<AUTO>
FlareCON Air
Programming Level
<CH01–16>
<CHxx>
<WIFI>
<DMX>
WIFI SSID
<Wi-Fi™ name>
WIFI Channel
<01–16>
Safety
Keyhole Mounting Holes
Hook and Loop Fastener
Function
Manually selects a channel for the D-Fi network
Automatically selects an available channel for the
D-Fi network
Sets the input mode to wireless Wi-Fi™ signal input
Sets the input mode to wired DMX signal input
Displays the name of the current Wi-Fi™ network
(SSID)
Displays the number of the current channel
4
Notes.
Threaded Mounting Holes
M10 and M12
Description
EN