Safety Instructions - Extel WEDO 76103 Manual De Instrucciones

Passive infrared motion detector
automatic control by built-in passive infrared detector
FEATURES
Type: RS 8B Attachment: by screws
Operating temperature: -20° to +50°C
Volumetric detector: passive infrared
Voltage: 230 V -50 Hz
Power supply: 1000 W. maxi for incandescent lamp (resistive load)
Power supply: 300 W. maxi for fluorescent lamp (inductive load)
Detection range: adjustable to more than 150° (viewing angle) and up to
a distance of 12 metres.
Operating time: adjustable from 5 seconds to 7 minutes approximately
Control level Lux: adjustable from 10 Lux to 150 Lux
Weather resistance: IP44 (product operating outdoors under shelter).

SAFETy INSTRUCTIONS

– This device must be connected to a domestic electrical installation
conform to NFC 15-100 standard for France.
– It can control only incandescent lamps up to 1000 W max. and fluo-
rescent lamps up to 300 W maxi. It cannot control energy-saving lamps
or halogen lamps with transducer or dimmer.
– Handling a disconnected wire may be dangerous.
Before intervening on the mains power supply or replacing a
lamp, it is absolutely imperative to cut off the power supply
(general circuit-breaker or fuse).
WEDO 76103 Instructions
04/2013 V3
WEDO 76103 - 04/2013 - V3