Operation; Hot Lamination - RS CS-900 Manual Del Propietário

OPeRATION

Hot Lamination

1. Place the machine on a flat, sturdy surface.
2. Turn the power switch to the on position. The machine will take approximately 5-10 minutes to warm-up. When the proper
temperature is reached, the ready light will turn on.
3. Place the item to be laminated into the laminating pouch.
4. Insert the pouch film into the front opening of the laminator. Make sure to place the sealed end of the pouch film in first.
5. The document or photo will then automatically feed out the through the back of the machine.
NOTe: Laminated items exiting the machine may be too hot to touch.
6. If the item is not completely laminated, repeat steps 4-5.
NOTe: Laminated items will be hot and will easily bend. To keep the item flat, place on a flat surface and allow it to cool.
always test a pouch through the laminator using a similar document.
Before laminating important or unique documents,
6