Descargar Imprimir esta página

Hkoenig km3 Manual De Instrucciones página 4

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 20
1.Connect the device to a 220-240V,/50/60 Hz safety contact power socket
2.Press the power switch button(8)..
3.Turn the pasta accessory on and adjusting the levels at
Note︓
With Pasta Accessory ,
allow it to cool down for a further 10 min.
Cleaning
• Before cleaning remove the mains lead from
the socket.
• Never immerse the housing with motor in
water!
• Do not use any sharp or abrasive detergents.
• After operation, all the accessories should be
cleaned as soon as possible in order to avoid
the ingredients stick on the accessories for
long time and difficult to clean.
• The pasta maker should put into water and
cleaning with dishcloth or brush (Sometimes
can dip in water for 10 minutes first, it will be
easier to clean)
• Be careful you hand get hurt when cleaning。
do not operate the machine for more than 15min and then
1-8
by the switch (6).

Publicidad

loading