Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPTION 2
WALL/STUD INSTALLATION
Items Needed:
BB - 1/4-20 x 3/4in Button Head Screw (Qty: 4)
DD - 1/4-20 Flange Nut (Qty: 4)
NOTE: Option 2 is for hanging cabinet directly on wall.
Holes are provided for studs on 16-in and 24-in centers.
Assembly shown for installation on 16-in centers.
Process:
• Assemble as shown using (4) BB screws and (4) DD nuts.
• Finger tighten.
BB
DD
Figure 9.1
Step 9 Option 2 Result
Note: Holes in back of cabinet are spaced to allow
mounting on studs with 16-in centers or 24-in centers.
Leave outside holes open to mount to studs on 24-in
centers. To mount to 16-in centers you will need to drill
thru the back panels using the holes provided in the top
cap from the inside.
24-in (61cm)
16"-in (40.6cm)
Figure 9.2
DOOR CONSTRUCTION
Items Needed:
A - Door Right (Qty: 1)
B - Door Left (Qty: 1)
LL - Left Hinge (Qty: 2)
MM - Right Hinge (Qty: 2)
EE - #10-24 x 1/2in Carriage Bolt (Qty: 8)
FF - 3/16in Washer (Qty: 8)
GG - 10-24 Keps Nut (Qty: 8)
Figure 10
Process:
• Attach (1) LL and (1) MM hinge to B door using (4) EE
screws, (4) FF washers and (4) GG nuts.
• Wrench tighten.
• Repeat for other door.
NOTE: The hinges for both doors MUST be mounted so
the hinge pin points UP at the TOP of the door and DOWN
at the bottom of the door.
EE
Figure 10.1
Step 10 Result
7
FF
GG
LL
B
MM
Publicidad
Tabla de contenido
