RadioRA
2 Visor Controls
®
Specifications
Model Numbers
Power
Typical Power
Consumption
Regulatory Approvals
Environment
Communications
ESD Protection
Surge Protection
Mounting
Connections
Warranty
Design Features
Each output can be controlled locally at the
•
Receiver or remotely by a Transmitter or
keypad button.
The Receiver 'Keypad' or 'Inputs' buttons can
•
be programmed to light and shades / draperies.
|
2
Lutron
®
product specifications
RR-VCRX-WH, RR-VCRX-WHBA, LR-3B-H-SW
Receiver: 9 V
300 mA
DC adapter:
Input: 120 V
60 Hz 6.5 W
Output: 9 V
300 mA
Transmitter: 6 V
10 mA (2 - CR2032, included – 10 year lifetime)
1.6 W
Test conditions: two LEDs on (two presets active), powered by the 9 V
adapter supplied, no CCOs or CCIs active.
DC adapter: UL Listed for U.S. and Canada, NOM
Receiver / Transmitter: FCC, IC, COFETEL, ANATEL
Receiver:
Ambient operating temperature: 32 °F to 140 °F (0 °C to 60 °C),
0% to 90% humidity, non-condensing. Indoor use only.
Transmitter:
Ambient operating temperature: -40 °F to 235 °F (-40 °C to 113 °C),
0%-90% humidity, non-condensing. Meets the Society of Automotive
Engineers (SAE) temperature standards.
Visor Controls communicate with the system through Radio Frequency (RF).
The Receiver must be located within 30 ft (9 m) of a Repeater. The typical
operating distance between a Receiver and a Transmitter is 150 ft (46 m).
System devices operate on frequencies between 431.0 MHz and 437.0 MHz.
Tested to withstand electrostatic discharge without damage or memory
loss, in accordance with IEC 61000-4-2.
Tested to withstand surge voltages without damage or loss of operation,
in accordance with IEEE C62.41-1991 Recommended Practice on
Surge Voltages in Low-Voltage AC Power Circuits.
Mount Receiver on a wall, ceiling, or level surface using the two #6 (M3)
screws provided. Clip Transmitter to a vehicle's visor.
2 Contact Closure Inputs, 1 security input, and 4 momentary or
maintained Contact Closure Outputs.
1 Year Limited Warranty. http://www.lutron.com/resiinfo
369-224e
Full or Flash security options.
•
The Transmitter can remotely control the
•
'Keypad', 'Security Input', and 'Outputs'
buttons on the Receiver.
24/7 Technical Support—800.523.9466
03.10.12