Triton Blue T300-3200-2550 Manual De Usuario página 8

EQUIPMENT INSTALLATION AND MAINTENANCE
• Pay special attention to that if power supply voltage is consistent with the host marking, ensure that the voltage is in
the identified voltage range of technical parameters.
• DMX512 signal input and output of the lamp connector cable is connected together.
• Please check before use connected 220V AC, make sure the power switch socket wiring is good. To ensure the safety
use of the power, directly connect switch. The ground wire for the light is in yellow / green colour.
• When moving and installing the light, please avoid to knock the hard object of metal.
• Before usage, please check if the light is damaged or the screw is loose for transportation.
• Please install the light in the dry and ventilated environment of less than 40 ºC, and ensure the smooth flow of the
ventilation slots.
• When using the light, please keep more than 100 cm away from flammable objects, and light must be reliable con-
nected to grounding.
• When the lens of the light generates visible damage, such as cracks or deep marks, it should be replaced; bulbs
should be replaced when damaged or deformed.
• Prohibit to use over the range of rated technical condition.
• Prohibit to operate with electricity and must operated by professional people when install, connect, adjust and check.
• User can't modify machine without permission, offenders should be responsible for the consequence.
• The correct method to clean the lens is to use vinegar or household ammonia, wet a clean thin cloth, gently wipe
the lens from the centre, also can use water to wipe, but after the water get dry there are some stains, which can be
gently wipe out with a clean dry cloth.
• When the electricity supply is cut off, the broken cable in the light end must be changed by the professional people
in time. The cable size is 3 x 1.5 square meter.
• Identification
Attention! Please replace the lens when it is visible damaged. Don't use any glass,
8.
1.0
Front distance should be 1 meter.
Other side except front side distance should be 0.5 meter.
The light is not suitable to install directly in the surface of
the flammable material.
Recycle according to the European Union's requirement
of WASTE ELECTRICAL AND ELECTRONIC
window cleaner or hard cloth to clean the lens.
User manual | T300-3200-2550 Triton Blue | October 2018 | www.triton-blue.com
Earth line
N
Null Wire
L
Phase line/ Live Wire