Descargar Imprimir esta página

Phil&Teds VERVE Manual De Instrucciones página 5

Ocultar thumbs Ver también para VERVE:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

IMPORTANT
• Always load/unload your children on level ground.
• Ensure the brake is engaged during the loading
and unloading of children.
• Care should be taken if the stroller is used on
stairs or escalators.
• Always use the safety strap.
• Excessive wear can reduce effectiveness and
safety. Parts may need lubrication. Inspect
essential components for:
Fraying - especially webbing straps and safety
harness.
Wear - locks, snap fasteners, tyres, plastic and
moving parts.
Safety - locks must not be loose.
Product Care / Conseils d'entretien / Produktpflege / Cuidado del producto / Productverzorging
Tyres & Tubes
The valve is car-size. Manually inflate to 20 –
22psi max. releasing air gives a softer ride but
lower pressure reduces tread life.
New inner tubes and tyres are generally
available (21/4" x 121/2" tyre) from your dealer,
cycle or specialist wheel shops. Standard tyre
kits can repair punctures.
A flat tyre can result from grit holding the valve
open; to check: inflate tyre, deflate rapidly, and
re-inflate.
Tyres and tubes are not under warranty. Do not
over inflate. Tyre pressure is affected by heat
especially when inside parked cars.
Rubber tyres can react with some surfaces
(including, but not limited to, vinyl floor
coverings, carpets, synthetic laminates,
parquet and linoleum) and cause stains.
Always stand the stroller on a protective
surface when indoors.
For rights & remedies, refer www.philandteds.com/warranty
VERVE
IMPORTANT

Publicidad

loading